The ST Standard Peripheral Library provides a set of functions for handling the peripherals on the STM32 family of microcontrollers. It includes all the features you need to develop a connected product based on an Arm Cortex-M microcontroller, including security, connectivity, an RTOS and drivers for sensors and I/O devices The libOpenCM3 framework aims to create a free and open-source firmware library for various ARM Cortex-M0(+)/M3/M4 microcontrollers, including ST STM32, Ti Tiva and Stellaris, NXP LPC, Atmel SAM3, Energy Micro EFM32 and othersĪrm Mbed OS is an open source embedded operating system designed specifically for the ‘things’ in the Internet of Things. It simplifies software re-use, reducing the learning curve for new microcontroller developers and cutting the time-to-market for devices The CMSIS enables consistent and simple software interfaces to the processor for interface peripherals, real-time operating systems, and middleware. The ARM Cortex Microcontroller Software Interface Standard (CMSIS) is a vendor-independent hardware abstraction layer for the Cortex-M processor series and specifies debugger interfaces. You don’t need to use/buy external debug probe.Īrduino Wiring-based Framework allows writing cross-platform software to control devices attached to a wide range of Arduino boards to create all kinds of creative coding, interactive objects, spaces or physical experiences ST Nucleo F401RE has on-board debug probe and IS READY for debugging. You can switch between debugging Tools & Debug Probes usingĭebug_tool option in “platformio.ini” (Project Configuration File). These controllers are responsible for pin muxing, input/output, pull-up, etc. Instructions and configuration information. Nucleo F401RE Board has 6 GPIO controllers. Please click on compatible debug tool below for the further You will need to install debug tool drivers depending on your system.
0 Comments
Leave a Reply. |